Links

Security and Compliance

This article lists the currently supported Security and Compliance reports with all of the properties that Syskit Point loads.

Reports

Audit Configuration Policy

Name
Description
Workload
Workload associated with the policy.

Compliance Cases

Name
Description
Name
The 'Name' property specifies the unique name of the compliance case.
Description
The description of the case.
Status
Status for the case. Can either be 'Active', 'Closed' or 'ClosedWithError'.

Data Loss Prevention

Name
Description
Name
The 'Name' property specifies the unique name of the DLP policy.
Comment
The 'Comment' property specifies an optional comment.
Exchange Location
The 'Exchange Location' property specifies Exchange Online mailboxes to include in the DLP policy. Only the value All is supported to include all mailboxes.
Exchange Sender Member Of
Exchange members to include.
Exchange Sender Member Of Exception
Exchange members to exclude.
Mode
The 'Mode' property specifies the action and notification level of the DLP policy. Valid values are: Enable, TestWithNotifications, TestWithoutNotifications, Disable and PendingDeletion.
OneDrive Location
The 'OneDrive Location' property specifies the OneDrive for Business sites to include. The value 'All' specifies to include all sites, otherwise the value will be a URL of the site.
OneDrive Location Exception
This property specifies the OneDrive for Business sites to exclude when you use the value All for the 'OneDrive Location' parameter. The site is identified by its URL value.
Priority
Priority for the Policy.
SharePoint Location
The 'SharePoint Location' property specifies the SharePoint Online sites to include. The value 'All' specifies to include all sites, otherwise the value will be a URL of the site.
SharePoint Location Exception
This property specifies the SharePoint Online sites to exclude when you use the value All for the 'SharePoint Location' parameter. The site is identified by its URL value.
Teams Location
Teams locations to include.
Teams Location Exception
Teams locations to exclude.

Device Conditional Access Policy

Name
Description
Name
The name of the Device Conditional Access Policy.
Comment
The 'Comment' property specifies an optional comment.
Enabled
The 'Enabled' property specifies whether the policy is enabled.

Device Configuration Policy

Name
Description
Name
The name of the Device Configuration Policy.
Comment
The 'Comment' property specifies an optional comment.
Enabled
The 'Enabled' property specifies whether the policy is enabled.

Retention

Name
Description
Name
The 'Name' property specifies the unique name of the retention policy.
Comment
The 'Comment' property specifies an optional comment.
Dynamic Scope Location
Location of the dynamic scope for this policy.
Enabled
Determines if the policy is enabled or not.
Exchange Location
The 'Exchange Location' property specifies the mailboxes to include.
Exchange Location Exception
This property specifies the mailboxes to remove from the list of excluded mailboxes when the 'Exchange Location' parameter is set to 'All'.
Modern Group Location
The 'Modern Group Location' property specifies the Office 365 groups to include in the policy.
Modern Group Location Exception
The 'Modern Group Location Exception' property specifies the Office 365 groups to exclude when the 'Modern Group Location' parameter is set to 'All'.
OneDrive Location
The 'OneDrive Location' property specifies the OneDrive for Business sites to include. The value 'All' specifies to include all sites, otherwise the value will be a URL of the site.
OneDrive Location Exception
This property specifies the OneDrive for Business sites to exclude when you use the value All for the 'OneDrive Location' parameter. The site is identified by its URL value.
Public Folder Location
The 'Public Folder Location' property specifies that you want to include all public folders in the retention policy.
Restrictive Retention
The 'Restrictive Retention' property specifies whether Preservation Lock is enabled for the policy.
SharePoint Location
The 'SharePoint Location' property specifies the SharePoint Online sites to include. You identify the site by its URL value, or you can use the value All to include all sites.
SharePoint Location Exception
This property specifies the SharePoint Online sites to exclude when you use the value All for the 'SharePoint Location' parameter. The site is identified by its URL value.
Skype Location
The 'Skype Location' property specifies the Skype for Business Online users to include in the policy.
Skype Location Exception
This property is reserved for internal Microsoft use.
Teams Channel Location
The 'Teams Channel Location' property specifies the Teams Channel to include in the policy.
Teams Channel Location Exception
This property specifies the Teams to exclude when 'Teams Channel Location' property is set to 'All'.
Teams Chat Location
The 'Teams Chat Location' property specifies the Teams Chat to include in the policy.
Teams Chat Location Exception
This property specifies the Teams users to exclude when the ' Teams Chat Location' property is set to 'All'.

Retention Event Types

Name
Description
Name
The 'Name' property specifies the unique name of the retention event type.
Comment
The 'Comment' property specifies an optional comment.

Supervision Policies

Name
Description
Name
The 'Name' property specifies the unique name for the supervisory review policy. The name can't exceed 64 characters.
Comment
The 'Comment' property specifies an optional comment.
Reviewers
The 'Reviewers' property specifies the SMTP addresses of the reviewers for the supervisory review policy. Multiple email addresses are separated by commas.

Compliance Cases ⯈ Case Hold Policy

Name
Description
Policy Name
The 'Policy Name' property specifies the unique name of the case hold policy.
Compliance Case
The 'Compliance Case' property specifies the eDiscovery case that is associated with the case hold policy.
Comment
The 'Comment' property specifies an optional comment.
Enabled
The 'Enabled' property specifies whether the policy is enabled or disabled.
Exchange Location
The 'Exchange Location' property specifies the mailboxes to include in the policy.
Public Folder Location
The 'Public Folder Location' property specifies all included public folders in the case hold policy.
SharePoint Location
The 'SharePoint Location' property specifies the SharePoint Online and OneDrive for Business sites to include.

Compliance Cases ⯈ Case Hold Rules

Name
Description
Policy
The 'Policy' property specifies the case hold policy that contains the rule.
Comment
The 'Comment' property specifies an optional comment.
Content Match Query
The 'Content Match Query' property specifies a content search filter. Only the content that matches the specified search query is placed on hold. This property uses a text search string or a query that's formatted by using the Keyword Query Language (KQL).
Disabled
The 'Disabled' property specifies whether the case hold rule is enabled or disabled.
Name
Description
Compliance Case
Compliance 'Compliance Case' (eDiscovery) that this Search is associated with.
Search Name
The 'Search Name' property specifies the unique name of the complaiance tag.
Allow Not Found Exchange Locations Enabled
The 'Allow Not Found Exchange Locations Enabled' property specifies whether to include mailboxes other than regular user mailboxes in the compliance search.
Content Match Query
The 'Content Match Query' property specifies a content search filter. This property uses a text search string or a query that's formatted by using the Keyword Query Language (KQL).
Description
The 'Description' property specifies an optional description for the compliance search.
Exchange Location
The 'Exchange Location' property specifies the mailboxes to include.
Exchange Location Exclusion
This property specifies the mailboxes to exclude when the 'Exchange Location' parameter is set to 'All'.
Hold Names
The 'Hold Names' property specifies that the content locations that have been placed on hold in the specified eDiscovery case are searched.
Include User App Content
The 'Include User App Content' property specifies that the cloud-based storage location for users who don't have a regular Office 365 user account in your organization are searched. These types of users include users without an Exchange Online license who use Office applications, Office 365 guest users, and on-premises users whose identity is synchronized with your Office 365 organization.
Language
The 'Language' property specifies the language for the compliance search. Valid input for this property is a supported culture code value from the Microsoft .NET Framework CultureInfo class. For example, da-DK for Danish or ja-JP for Japanese.
Public Folder Location
The 'Public Folder Location' property specifies that you want to include all public folders in the search.
SharePoint Location
The 'SharePoint Location' property specifies the SharePoint Online sites to include.
SharePoint Location Exclusion
This property specifies the SharePoint Online sites to exclude when the 'SharePoint Location' parameter is set to 'All'. You identify the site by its URL value.

Compliance Cases ⯈ Compliance Search Action

Name
Description
Search Name
The 'Search Name' property specifies the name of the existing content search to associate with the content search action. Multiple content searches are separated by commas.
Action
The 'Action' property specifies what type of action to define. Accepted values are Export, Retention and Purge.
File Type Exclusions For Unindexed Items
The 'File Type Exclusions For Unindexed Items' specifies the file types to exclude because they can't be indexed.
Enable Deduplication
The 'Enable Deduplication' property eliminates duplication of messages when you export content search results.
Include Credential
The 'Include Credential' switch specifies whether to include the credential in the results.
Include SharePoint Document Versions
The 'Include SharePoint Document Versions' property specifies whether to export previous versions of the document when you use the Export switch.
Purge Type
The 'Purge Type' property specifies how to remove items when the action is Purge.
Retry On Error
The 'Retry On Error' switch specifies whether to retry the action on any items that failed without re-running the entire action all over again.
Action Scope
The 'Action Scope' property specifies the items to include when the action is Export.

Data Loss Prevention ⯈ Data Loss Prevention Rules

Name
Description
Policy
Name of the associated DLP Compliance Policy.
Name
Name of the Rule.
Access Scope
The 'Access Scope' property specifies a condition for the DLP rule that's based on the access scope of the content. The rule is applied to content that matches the specified access scope.
Block Access
The 'Block Access' property specifies an action for the DLP rule that blocks access to the source item when the conditions of the rule are met. True: Blocks further access to the source item that matched the rule. The owner, author, and site owner can still access the item. False: Allows access to the source item that matched the rule. This is the default value.
Block Access Scope
The 'Block Access Scope' property specifies the scope of the block access action.
Comment
The 'Comment' property specifies an optional comment.
Content Property Contains Words
The 'Content Property Contains Words' property specifies a condition for the DLP rule that's based on a property match in content. The rule is applied to content that contains the specified property.
Disabled
The 'Disabled' property specifies whether the DLP rule is disabled.
Generate Alert
The 'Generate Alert' property specifies an action for the DLP rule that notifies the specified users when the conditions of the rule are met.
Generate Incident Report
The 'Generate Incident Report' property specifies an action for the DLP rule that sends an incident report to the specified users when the conditions of the rule are met.
Incident Report Content
The 'Incident Report Content' property specifies the content to include in the report when you use the 'Generate Incident Report' parameter.
Notify Allow Override
The 'Notify Allow Override' property specifies the notification override options when the conditions of the rule are met.
Notify Email Custom Text
The 'Notify Email Custom Text' property specifies the custom text in the email notification message that's sent to recipients when the conditions of the rule are met.
Notify Policy Tip Custom Text
The 'Notify Policy Tip Custom Text' property specifies the custom text in the Policy Tip notification message that's shown to recipients when the conditions of the rule are met. The maximum length is 256 characters. HTML tags and tokens (variables) aren't supported.
Notify User
The 'Notify User' property specifies an action for the DLP rule that notifies the specified users when the conditions of the rule are met.
Report Severity Level
The 'Report Severity Level' property specifies the severity level of the incident report for content detections based on the rule.
Rule Error Action
The 'Rule Error Action' property specifies what to do if an error is encountered during the evaluation of the rule.

Labels ⯈ Retention Labels

Name
Description
Name
The 'Name' property specifies the unique name of the complaiance tag.
Comment
The 'Comment' property specifies an optional comment.
Event Type
The 'Event Type' property specifies the retention rule that's associated with the label.
Is Record Label
The 'Is Record Label' property specifies whether the label is a record label.
Notes
The 'Notes' property specifies an optional note.
Regulatory
Regulatory description.
Reviewer Email
The 'Reviewer Email' property specifies the email address of a reviewer for Delete and KeepAndDelete retention actions. Multiple email addresses are separated by commas.
Retention Duration
The 'Retention Duration' property specifies the hold duration for the retention rule. Valid values are: An integer - The hold duration in days, Unlimited - The content is held indefinitely.
Retention Action
The 'Retention Action' property specifies the action for the label. Valid values are: Delete, Keep or KeepAndDelete.
Retention Type
The 'Retention Type' property specifies whether the retention duration is calculated from the content creation date, tagged date, or last modification date. Valid values are: CreationAgeInDays, EventAgeInDays, ModificationAgeInDays, or TaggedAgeInDays.

Labels ⯈ Sensitivity Label Policies

Name
Description
Name
The 'Name' property specifies the unique name for the sensitivity label. The maximum length is 64 characters. If the value contains spaces, enclose the value in quotation marks.
Comment
The 'Comment' property specifies an optional comment.
Exchange Location
The 'Exchange Location' property specifies the mailboxes to include in the policy.
Exchange Location Exception
The 'Exchange Location Exception' property specifies the mailboxes to exclude when you use the value All for the 'Exchange Location' parameter.
Modern Group Location
The 'Modern Group Location' property specifies the Microsoft 365 Groups to include in the policy.
Modern Group Location Exception
The 'Modern Group Location Exception' property specifies the Microsoft 365 Groups to exclude when you're using the value All for the 'Modern Group Location' parameter.
Labels
The 'Labels' property specifies the sensitivity labels that are associated with the policy. You can use any value that uniquely identifies the label.
Add Exchange Location
The 'Add Exchange Location' property specifies the mailboxes to add in the existing policy.
Add Exchange Location Exception
The 'Add Exchange Location Exception' property specifies the mailboxes to add to exclusions when you use the value All for the 'Exchange Location' parameter.
Add Modern Group Location
The 'Add Modern Group Location' property specifies the Microsoft 365 Groups to add to include the policy.
Add Modern Group Location Exception
The 'Add Modern Group Location Exception' property specifies the Microsoft 365 Groups to add to exclusions when you're using the value All for the 'Modern Group Location' parameter.
Add Labels
The 'Add Labels' property specifies the sensitivity labels to add to the policy. You can use any value that uniquely identifies the label.
Remove Exchange Location
The 'Remove Exchange Location' property specifies the mailboxes to remove from the policy.
Remove Exchange Location Exception
The 'Remove Exchange Location Exception' property specifies the mailboxes to remove when you use the value All for the 'Exchange Location' parameter.
Remove Modern Group Location
The 'Remove Modern Group Location' property specifies the Microsoft 365 Groups to remove from the policy.
Remove Modern Group Location Exception
The 'Remove Modern Group Location Exception' property specifies the Microsoft 365 Groups to remove from excluded values when you're using the value All for the 'Modern Group Location' parameter.
Remove Labels
The 'Remove Labels' property specifies the sensitivity labels that are removed from the policy. You can use any value that uniquely identifies the label.

Labels ⯈ Sensitivity Labels

Name
Description
Name
The 'Name' property specifies the unique name for the sensitivity label. The maximum length is 64 characters.
Display Name
The 'Display Name' property specifies the display name for the sensitivity label. The display name appears in the Microsoft Office and is used by Outlook users to select the appropriate sensitivity label before they send a message.
Comment
The 'Comment' property specifies an optional comment.
Parent Id
The 'Parent Id' property specifies the parent label that you want this label to be under (a sublabel).
Priority
The 'Priority' property specifies a priority value for the sensitivity label that determines the order of label processing. A lower integer value indicates a highter priority.
Tooltip
The 'Tooltip' property specifies the default tooltip and sensitivity label description that's seen by users.
Disabled
The disabled property specifies whether to enable or disable the sensitivity label.
Apply Content Marking Footer Alignment
The 'Apply Content Marking Footer Alignment' property specifies the footer alignment.
Apply Content Marking Footer Enabled
The disabled property specifies whether to enable or disable the sensitivity label.
Apply Content Marking Footer Font Color
The 'Apply Content Marking Footer Font Color' property specifies the color of the footer text. This property accepts a hexadecimal color code value in the format #xxxxxx. The default value is #000000.
Apply Content Marking Footer Font Name
The 'Apply Content Marking Footer Font Name' property specifies the font of the footer text. If the value contains spaces, enclose the value in quotation marks.
Apply Content Marking Footer Font Size
The 'Apply Content Marking Footer Font Size' property specifies the font size (in points) of the footer text.
Apply Content Marking Footer Margin
The 'Apply Content Marking Footer Margin' property specifies the size (in points) of the footer margin.
Apply Content Marking Footer Text
The 'Apply Content Marking Footer Text' property specifies the footer text. If the value contains spaces, enclose the value in quotation marks.
Apply Content Marking Header Alignment
The 'Apply Content Marking Footer Alignment' property specifies the header alignment.
Apply Content Marking Header Enabled
The 'Apply Content Marking Header Enabled' property enables or disables the Apply Content Marking Header action for the label.
Apply Content Marking Header Font Color
The 'Apply Content Marking Footer Font Color' property specifies the color of the header text. This property accepts a hexadecimal color code value in the format #xxxxxx. The default value is #000000.
Apply Content Marking Header Font Name
The 'Apply Content Marking Footer Font Name' property specifies the font of the header text. If the value contains spaces, enclose the value in quotation marks.
Apply Content Marking Header Font Size
The 'Apply Content Marking Footer Font Size' property specifies the font size (in points) of the header text.
Apply Content Marking Header Margin
The 'Apply Content Marking Footer Margin' property specifies the size (in points) of the header margin.
Apply Content Marking Header Text
The 'Apply Content Marking Footer Text' property specifies the header text. If the value contains spaces, enclose the value in quotation marks.
Apply Water Marking Enabled
The 'Apply Water Marking Enabled' property enables or disables the Apply Watermarking Header action for the label.
Apply Water Marking Font Color
The 'Apply Water Marking Font Color' property specifies the color of the watermark text. This property accepts a hexadecimal color code value in the format #xxxxxx.
Apply Water Marking Font Name
The 'Apply Water Marking Font Name' property specifies the font of the watermark text. If the value contains spaces, enclose the value in quotation marks.
Apply Water Marking Font Size
The 'Apply Water Marking Font Size' property specifies the font size (in points) of the watermark text.
Apply Water Marking Layout
The 'Apply Content Marking Footer Alignment' property specifies the header alignment.
Apply Water Marking Text
The 'Apply Water Marking Text' property specifies the watermark text. If the value contains spaces, enclose the value in quotation marks.
Encryption Aip Template Scopes
The 'Encryption Aip Template Scopes' property specifies that the label is still published and usable in the AIP classic client.
Encryption Content Expired On Date In Days Or Never
The 'Encryption Content Expired On Date In Days Or Never' property specifies when the encrypted content expires. Valid values are integer or never.
Encryption Do Not Forward
The 'Encryption Do Not Forward' property specifies whether the Do Not Forward template is applied.
Encryption Enabled
The 'Encryption Enabled' property specifies whether encryption in enabled.
Encryption Offline Access Days
The 'Encryption Offline Access Days' property specifies the number of days that offline access is allowed.
Encryption Prompt User
The 'Encryption Prompt User' property specifies whether to set the label with user defined permission in Word, Excel, and PowerPoint.
Encryption Protection Type
The 'Encryption Protection Type' property specifies the protection type for encryption.
Encryption Rights Definitions
The 'Encryption Rights Definitions' property specifies the rights users have when accessing protected. This property uses the syntax Identity1:Rights1, Rights2;Identity2:Rights3, Rights4. For example, [email protected]:VIEW, EDIT;microsoft.com:VIEW.
Encryption Rights Url
The 'Encryption Rights Url' property specifies the URL for hold your own key (HYOK) protection.
Encryption Template Id
The 'Encryption Template Id' property links an existing Azure RMS template to a new label.
Site And Group Protection Allow Access To Guest Users
The 'Site And Group Protection Allow Access To Guest Users' property enables or disables access to guest users.
Site And Group Protection Allow Email From Guest Users
The 'Site And Group Protection Allow Email From Guest Users' property enables or disables email from guest users.
Site And Group Protection Allow Full Access
The 'Site And Group Protection Allow Full Access' property enables or disables full access.
Site And Group Protection Allow Limited Access
The 'Site And Group Protection Allow Limited Access' property enables or disables limited access.
Site And Group Protection Block Access
The 'Site And Group Protection Block Access' property blocks access.
Site And Group Protection Enabled
The 'Site And Group Protection Enabled' property enables or disables the Site and Group Protection action for the labels.
Site And Group Protection Privacy
The 'Site And Group Protection Privacy' property specifies the privacy level for the label.

Labels ⯈ File Plan Descriptors ⯈ Authorities

Name
Description
Name
The 'Name' property specifies the unique name of the Authority.

Labels ⯈ File Plan Descriptors ⯈ Categories

Name
Description
Name
The 'Name' property specifies the unique name of the category.

Labels ⯈ File Plan Descriptors ⯈ Citations

Name
Description
Name
The 'Name' property specifies the unique name of the citation.
Citation Url
URL of the citation.
Citation Jurisdiction
Jurisdiction of the citation.

Labels ⯈ File Plan Descriptors ⯈ Departments

Name
Description
Name
The 'Name' property specifies the unique name of the department.

Labels ⯈ File Plan Descriptors ⯈ Reference Ids

Name
Description
Name
The 'Name' property specifies the unique name of the reference id.

Labels ⯈ File Plan Descriptors ⯈ Subcategories

Name
Description
Name
The 'Name' property specifies the unique name of the sub-category.
Category
The 'Category' property specifies the name of the parent category associated with the sub-category.

Retention ⯈ Retention Rules

Name
Description
Policy
The 'Policy' property specifies the policy to contain the rule.
Comment
The 'Comment' property specifies an optional comment.
Expiration Date Option
The 'Expiration Date Option' property specifies whether the expiration date is calculated from the content creation date or last modification date. Valid values are: CreationAgeInDays and ModificationAgeInDays.
Excluded Item Classes
The 'Excluded Item Classes' property specifies the types of messages to exclude from the rule. This property is used to exclude items from a hold policy, which excludes the specified item class from being held. Using this property won't exclude items from deletion policies. Typically, this property is used to exclude voicemail messages, IM conversations, and other Skype for Business Online content from being held by a hold policy.
Content Match Query
The 'Content Match Query' property specifies a content search filter.
Retention Compliance Action
The 'Retention Compliance Action' property specifies the retention action for the rule. Valid values are: Delete, Keep and KeepAndDelete.
Retention Duration
The 'Retention Duration' property specifies the hold duration for the retention rule. Valid values are: An integer - The hold duration in days, Unlimited - The content is held indefinitely.
Retention Duration Display Hint
The 'Retention Duration Display Hint' property specifies the units that are used to display the retention duration in the Security and Compliance Center. Valid values are: Days, Months or Years.

Supervision Policies ⯈ Supervision Rules

Name
Description
Policy
The 'Policy' property specifies the supervisory review policy that's assigned to the rule.
Sampling Rate
The 'Sampling Rate' property specifies the percentage of communications for review. A value of 100 means the reviewers need to review all detected items.
Condition
The 'Condition' property specifies the conditions and exceptions for the rule.